More Than a Pint: Life in the Bottle Bank Cellar
By Rich, The Bottle Bank
October is here. The weather has a definite chill in the air and the nights are drawing in. After a cracking summer our autumnal decorations are up and the bar is set for Halloween. I’m writing this on a Thursday, mornings of which are usually reserved for our management catch-up while a U3A group come in to play games in the early afternoon. Today however I’m ever so slightly behind the curve, and still writing this as the bar fills up.
I’m behind on things because this morning, we had a visit from the owners of one of our favourite breweries who, having taken on a new group account manager, wanted to introduce her to a friendly place to understand more about the cellaring and behind the scenes stuff their trade customers have to deal with. To be asked by a brewery to show their team how things worked this side of the business is, I’d like to think, a bit of a feather in the cap, especially considering the number of bars they send their beer out to!
I had a good chat with them, showing them how we look after their beers, talking about how we dispense the cask and keg beers, our customers and the support we want from a brewery. It was also interesting to hear from them how their larger accounts work, it’s nice (reassuring sometimes!) to know how we as a small venue operate stack up against the big boys of the pub world, what we can learn from them, or what we’re happy to keep doing ourselves!
In the Bottle Bank, we use a vertical stillage system for our casks, not the horizontal tilting method to dispense beer. This means our barrels get dropped into the cellar and stand on their end which allows all the sediment to stay at the bottom, rather than being laid down on their sides into a little rack that tilts the barrel up as it empties. After letting the cask settle for a couple of days, we then tap the cask through the keystone, before letting it vent for a couple of days. The next step is to take the tap cap off and insert the float, a flexible silicon tube that has a filter and float at its end and connect this up to the beer line. The tube goes down through the centre of the tap inside the cask so we can pull the beer from the top. We can control the venting and secondary fermentation during the time it’s on by closing the tap off at night and keeping a soft spile in the vent. Because we’re always pulling from the furthest part of the beer from the sediment, it means you get as clear a pint as we can possibly give you.
The alternative, or more traditional method is a bit more fussy to look after, and for us as a bar, tends to be a bit more wasteful because the beer is always flowing over the sediment in the bottom of the belly of the barrel. When the cask has been placed onto the autotilt, a spigot is hammered into the keystone and a soft spile is inserted into the shive to allow excess pressure to vent. The beer-line is connected up to the spigot, ready to pull through the keystone which is at the lowest part of the autotilt. At the end of service a hard spile is swapped in and used to keep the pressure up until the next day when it’s swapped back for a soft spile to allow the beer to flow to the pumps.
When you consider the increased manual handling, the extra cellar space and the cost of the autotilts and racking needed to store and serve from, vertical stillage makes far more sense to us as a small business.
Until next time, we’ll see you at the bar.

Comments